Roof Anchors Installation

Ensuring Safe Working with Roof Anchor Point Installation

All employers have a responsibility for the people they employ and that extends to ensuring they can work safely. That’s especially important when working at height since this is one of the biggest areas of serious and fatal accidents.

Working at height is necessary when servicing, maintaining or extending roof features and so, no matter how infrequently that takes place, roof anchor installation is vital to ensure worker safety. However, many roofs are unique in size and layout so the installation of roof anchor points has to account for this.

Types of Anchor Point

Below are some of the most popular anchor point options we carry and how they can improve your work site.

Rigid Post Single Anchor Points

These models are perfect for:

– Roof surfaces with a pitch that is 5:12 or higher.
– They offer a secure tether for workers to move down the sloping roof
– Ideal for tethering materials that could fall on a slope.
– Perfect for suspended activities like window washing.

Tip-Over Single Anchor Points

Tip-over models provide:

– Ideal tethering for roof surfaces with a pitch of 4:12 or below
– Tip-over mechanism lessens the impact of a fall on the incline
– Spreads the impact area
– Allows for the surface to remain intact even with heavier tethered objects

Portable Single Anchor Points

The portable model provides:

– Easy way to attach to areas like parapet walls and door and window jams
– Provide secure tethering without the need to set up a permanent system – Ideal for roof maintenance professionals and other industries where you may spend limited time working in an elevated area

Correct Positioning and Installation

Roof anchors are vital to protect employees and contractors who are working on roofs. They provide a secure point to which lifelines and lanyards can be attached so that maintenance and cleaning teams are protected from falls. Their safety is ensured in a hands-free manner so they can carry out their work confidently and without restrictions. Read More

Anchors are positioned as part of a fall protection system so that workers cannot get near to hazards such as roof edges, or for fall arrest so that, if a worker does fall, the fall is stopped quickly and safely. However, even though roof anchors are so important for safety, they’re often not included when buildings are constructed and so need to be added later. Consequently, if they’re not installed, there’s a lack of compliance with OSHA, ANSI and ASME regulations when working on the roof.

Since every roof is different and the work on them can vary, we’ll assess each roof thoroughly and determine your needs. A comprehensive inspection of your roof combined with an analysis of safety will enable us to design a system layout that will work well for you. The aim is to enable workers to move freely around the roof and be able to complete the required work while remaining completely safe.

The proposed system can provide for the suspension of platforms and the inclusion of all types of fall protection systems. The result will be a roof that complies with regulations and provides a safe and convenient working environment.

Ensuring Consistent and Reliable Roof Anchor Point Installation

Roof anchors are a critical element in the provision of safety for those working at height. We have many years of experience working with all types of safety systems and can install them effectively on any type of roof. All anchor points have to be able to comply with regulations, which mainly means they must be capable of supporting a minimum of 5,000 pounds per attached employee or have a safety factor of two (they can withstand twice the force applied in a fall).

Safety doesn’t just have to be assured at the time of installation, it also has to apply right through the life of an anchorage. So we only supply the highest quality equipment that won’t corrode or otherwise deteriorate and we can inspect and test it at prescribed intervals to make sure it’s compliant and effective. Whatever anchor installations you need, we can supply and care for them so they’re safe whenever you need to use them.
Read Less

What is the Importance of Roof Anchor Point Installation?

An Anchorage Connectors is:

– A fall protection device that attaches to the main work structure
– Acts as an attachment point for other components used for fall arrest
– Depending on the nature of the job site, there could be some variation in how anchorage connectors are used.
– Anchorage connectors used frequently will most likely be permanently fixed in place
– Some job sites may have anchors that can be moved
– Style of the connector will also vary based on the job

Access Systems Provide:

– A more portable form of fall protection anchor
– Intended for use with equipment that may require a worker to be significantly elevated
– Typically come in a mobile frame or jib that can serve as an attachment point for various fall arresting devices
– Normally custom designed to ensure that they provide adequate protection when working with the specific piece of equipment in question

Horizontal Lifelines Provides:

– A substitute for anchorage connectors for workers who might not reach them consistently
– Can attach to a concrete column, a rebar stud, an I-beam, or a roof,
– A versatile safety measure that can be catered to each individual job site
– Can be made from galvanized steel or synthetic material, depending on what is most appropriate for the job